TM 5-3805-248-23-1
BOWL LIFT CYLINDERS REPLACEMENT - CONTINUED
0242 00
REMOVAL - CONTINUED
NOTE
Use a container to capture draining hydraulic oil. Dispose of hydraulic oil IAW local policy and ordi-
nances. Ensure all spills are cleaned up.
Tag hose and tube assemblies prior to removal to ensure correct installation.
Note routing of all hose assemblies prior to removal to ensure correct installation.
Ensure bowl is resting on blocks.
1.
Attach lifting device to top of bowl lifting cylinder.
2.
Remove bolt (1), pin (3) and pin (2) from bowl lifting cylinder (4).
4
3
2
1
394-555
3.
Remove four capscrews (5) and washers (6) from tube assembly (7).
4.
Disconnect tube assembly (7) and remove preformed packing (8). Discard preformed packing.
5.
Remove four capscrews (11), washers (12) and two flange halves (9) from bottom of bowl lifting cylinder (4).
6.
Disconnect hose assembly (13) and remove preformed packing (10). Discard preformed packing.
7
8 (HIDDEN)
5,6
9,10
(HIDDEN)
11,12
13
4
394-562
0242 00-2
