TM 5-3805-248-23-1
EJECTOR CYLINDER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
Unit
Rag, wiping (Item 35, WP 0339 00)
Tag, marker (Item 42, WP 0339 00)
Tools and Special Tools
Tool kit, general mechanic's (Item 113, WP 0338
References
TM 5-3805-248-10
Shop equipment, common no. 1 (Item 104, WP
Personnel Required
Lifting device, 750 lb minimum capacity
Two
Materials/Parts
Equipment Condition
Cap set, protective (Item 6, WP 0339 00)
Scraper bowl plate assembly removed (WP 0256
Cleaning compound, solvent (Item 8, WP 0339 00)
Oil, lubricating (Item 32, WP 0339 00)
Ejector hose assemblies removed (WP 0241 00)
REMOVAL
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Weight of ejector cylinder is 456 lb (207 kg).
