TM 5-3805-248-23-1
EJECTOR CYLINDER REPLACEMENT - CONTINUED
0243 00
REMOVAL - CONTINUED
1.
Attach lifting device to ejector cylinder assembly (5) at both ends.
FIXED END
ROD END
5
394-565
2.
Remove four bolts (1), two locks (4), washers (2) and pin (3) from ejector cylinder assembly (5).
2,3
1
4
5
394-563
3.
Remove four bolts (6), two locks (9), washers (7) and pin (8) from ejector cylinder assembly (5).
4.
Position wood blocks under rod end of cylinder assembly (5) on ejector cross member.
0243 00-2
