TM 5-3805-248-23-2
PISTON AND CONNECTING ROD MAINTENANCE - CONTINUED
0348 00
DISASSEMBLY
NOTE
Repeat steps 1 through 7 for disassembly and remaining piston and connecting rod sets. Keep all sets
separated and tag for identification.
Tag each piston and connecting rod set to ensure correct assembly.
1.
Remove two nuts (1), cap (3) assembly and two bolts
(5).
4
2.
Remove one of two bearings (6) from cap (3).
3.
Remove remaining bearing (6) from piston (4) assem-
bly.
5
6
3
1
394-1160
CAUTION
7
Piston ring expander must be used to
remove rings. Use of any other tool may
cause damage to piston lands.
8
4.
Remove and discard top piston ring (7), second piston
ring (8) and oil ring (9) from piston (4).
9
5.
Use retaining ring pliers to remove two retaining rings
(10).
6.
Remove pin (11) and piston (4) from connecting rod
(2) assembly.
11
4
10
2
394-1161
0348 00-4
