TM 5-3805-248-23-2
SUPPLEMENTAL STEERING PUMP REPAIR - CONTINUED
0379 00
ASSEMBLY - CONTINUED
35.
Use clean oil to lubricate and install new center separator (35), two new end separators (38), new sealing strips (36) and
isolation plates (37). Isolation plates (37) have the same edge on either side and can be installed either way. Two new
sealing strips (36) must not be twisted after installation.
5
33
34
35
36 37
39
38
394-1525
36.
Use snap ring pliers to install two snap rings (32) in coupling (31).
37.
Install coupling (31) assembly on front drive gear (33). Do not turn gears.
38.
Install new preformed packing (30) in groove of valve body (4).
39.
Install front body (5) assembly on valve body (4). Align, using scribe marks from step 1 of Disassembly in this work
package.
4
30
5
31,32
394-1524
0379 00-17
