TM 5-3805-260-24
AIR COMPRESSOR
14. Remove the six bolts that hold cylinder block
(18) to the crankcase. Remove cylinder block
(18) and the gasket.
15. Remove the two bolts and remove inlet elbow (19) and plate (20)
from cylinder block (18).
16. Remove inlet valve guides (21) from cylinder block (18).
17. Remove the unloader mechanism from the cylinder block as
follows:
a) remove spring (23).
b) remove saddle (25).
c) remove plungers (22) and pistons (24).
18. Remove key (27) from the crankshaft.
19. Remove the four bolts and remove front cover (26) from the
crankcase.
3-17