TM 5-3805-260-24
AIR COMPRESSOR
REMOVE AIR COMPRESSOR
WARNING: Do not disconnect the air lines until the air
pressure in the system is at zero.
1
Loosen bolts (2) to release the tension and remove vee belt
(1) from the air compressor pulley.
2.
Disconnect air lines (3), (4) and (6) from the air compressor.
3.
Disconnect air line (5) from the air compressor governor.
4.
Remove four bolts (7) that hold the air compressor and
remove the air compressor from the engine. The weight of
the air compressor is 30 lb. (14 kg).
INSTALL AIR COMPRESSOR
1.
Put air compressor (1) and the gasket in position on the
engine.
2.
Install four bolts (2) that hold air compressor(l).
3. Connect air lines (3), (4) and (6) to the air compressor.
4.
Connect air line (5) to the air compressor governor.
5.
Install vee belt (7) on the air compressor pulley. Tighten bolts
(8) for the belt tightener to hold the correct tension on vee
belt (7). To get the correct belt tension use a tension gauge
such as Burroughs Tool Company Part No. BT-33-96-4-16
or an equivalent. The correct gauge indication is 120 + 5.
3-14
