TM 5-3805-260-24CRANKCASE GUARDREMOVE AND INSTALLCRANKCASE GUARDTools NeededA5P3050Jack Group11.Remove all but four of the bolts that hold crank- case guard (1) in position. Loosen these four bolts. Do not remove the four bolts.2.Put tool (A) in position and fasten it to crankcase guard (1) as shown. Remove the four bolts that hold the crankcase guard and lower it from the machine with tool (A). The weight of the crank-case guard is 200 lb. (90 kg).3.Put crankcase guard (1) in position on the machine with tool (A).4.Install bolts (2). Remove tool (A) and tighten the bolts.3-39
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
