TM 5-3805-260-24
12. Remove washers (25) and (26) from armature (21).
13. Remove three screws (27), lockwashers (28), and
plate assembly (29) from frame assembly(4).
14. Remove two washers (30) from terminal stud.
15. Remove seal (31) from frame assembly (4).Remove
insulator (32) from plate assembly(29).
16. Remove twelve screws (33), lockwashers(34),
plate (35), washers (36), insulator (37), plates (38,
39, and 40) to free six brushholders (41).
17. Remove six screws (42) and brushes (43) from
brush holders (41).
18. Remove plunger assembly (19) from lever housing
(2).
19. Remove retaining ring (43), retainer (44), spring
(45), retainer (46), boot (47), and washer (48)
from plunger assembly (19).
20. Remove nut (49), lockwasher (50), terminal (51),
nut (52), three washers (53 and 54) from armature
housing (3).
21. Remove twelve screws (55), pole shoes (56),
insulator bushing (57), coil assembly (58), three
insulators (59), and insulator (60) from armature
housing (3).
22. Remove retaining ring (61) and shaft (62) from lever
housing (2).
23. Remove lever assembly (63) and two seals (64)
from shaft (62).
3-42
