TM 5-3805-260-24
ELECTRIC STARTING MOTOR-
REMOVE ELECTRIC STARTING
MOTOR
start by:
a)
remove crankcase guard
1.
Put identification on the electric wires as to their
location on the motor. Disconnect wires (1), (2), (3) and
(4) from the motor.
2.
Remove the three bolts (6) and lower starting
motor (5) from the machine. The weight of motor is 60
lb. (27 kg).
NOTE: On Models 613BSS1 and 613BSNS1 starter
receptacle wire must be disconnected from starter and
solenoid.
DISASSEMBLE DELCO-REMY STARTING
MOTOR (3T8946)
1.
Use a suitable marking tool to scribe a line
across the drive housing (1), lever housing (2), armature
housing (3), and frame assembly (4).
2.
Remove five screws (5), screw (6), drive housing
(1), and gasket (7) from lever housing (2).
3.
Remove three inspection plugs (8) and gaskets
(9) from armature housing (3).
4.
Remove nut (10), lockwasher (11), washer (12),
and insulator assembly (13) from the terminal stud.
5.
Remove six capscrews (14).
3-40
