TM 5-3805-260-24
6. Disconnect stator wiring by removing three screws
(15).Remove frame assembly (4) from armature housing
(3).
7. Remove inspection plug (16) and preformed packing (17)
from lever housing (2).
8. Remove nut (18) from shaft of plunger assembly (19).
9. Remove seven capscrews (20) and separate lever housing
(2) from armature housing (3).
10. Remove armature (21) from armature housing (3).
11. Remove seal (22), seal (23), and bearing (24) from lever
housing (2).
3-41
