TM 5-3805-260-24
OUTPUT TRANSFER GEARS
10.
Remove Dolt (X) and the retainer. Remove
range assembly (7).
11.
Remove bolts (9) and use two 3/8"-16 NC forcing
screws to remove cage (11) and the shim.
12.
Remove seal (10) from cage ( 11).
13.
Remove the bearing cup from cage (11) with
tooling (A). Remove O-ring seal (12) from the
cage.
14.
Fasten a hoist to case (14) and put it in the
position shown.
15.
Remove the bolts and use two 3/8"-16 NC
forcing screws to remove the cage and shims
(13) from case (14). Keep the shims together for
assembly.
16.
Remove seal (16) from the bottom of cage (15).
3-220
