TM 5-3805-260-24
OUTPUT TRANSFER GEARS
17.
Remove the bearing cup from cage (15) with
tooling (A). Remove O-ring seal (17) from the
cage.
18.
Remove the bolts from cage (18). Use two 3/8"-
16 NC forcing screws and remove the cage from
case (14).
19.
Remove the bearing cup from cage (18) with
tooling (A). Remove O-ring seal (19) from the
cage.
20.
Remove gear (20) and the shaft assembly from
the case.
21.
Use tooling (B) and remove the bearing cone
from shaft assembly (21).
22.
Remove gear (20) and the bearing cone from
shaft assembly (21) with tool (C).
3-221
