TM 5-3805-260-24
OUTPUT TRANSFER GEARS
14.
Install gear (16) on output shaft (17).
15.
Heat bearing cone (15) in oil to a maximum
temperature of 275°F (135°C). Install bearing cone
(15) on shaft (17).
16.
Heat bearing cone (18) in oil to a maximum
temperature of 275°F (135°C). Install bearing cone
(18) on shaft (17).
17.
Install output shaft (17) in the output transfer gear
case.
18.
Install O-ring seal (21) on the output shaft rear
bearing cage (20).
19.
Lower the temperature of bearing cup (19) and
install it in cage (20).
20.
Install cage (20) on the output transfer gears case.
3-225
