TM 5-3805-260-24
DIFFERENTIAL AND CARRIER ASSEMBLY
5.
Remove the guide bolts and install the original bolts
(I).
6.
Install the eight nuts (2) and tighten.
7.
Install the bolts that hold tee assembly (4) to the
frame.
8.
Install the bolt in the clip that holds the right wheel
brake line (3) to the frame.
9.
Install muffler (5) and tube (6).
10.
Install axles (8).
11.
Make sure the flat surfaces on shafts (7) are in the
position shown.
12.
Make a replacement of the O-ring seal in the final
drive covers if necessary. Install the final drive
covers.
13.
Fill the differential and final drive compartments with
oil to the correct level.
end by:
a)
install lower drive shaft
b)
install crankcase guard
3-230
