TM 5-3805-260-24
BOWL AND EJECTOR CONTROL VALVE
11.
Remove plugs (29) from the body. Remove the
O-ring seals from the plugs. Check the condition
of the O-ring seals. If the seals have damage,
use new parts for replacement.
12.
Remove springs (30) and the plungers from the
body.
ASSEMBLE BOWL AND EJECTOR
CONTROL VALVE
Tools Needed
A
B
1P1857
Snap Ring Pliers
1
1P1856
Snap Ring Pliers
1
1.
Make sure all of the parts are clean and free of
dirt and foreign material. Put clean hydraulic oil
on all of the parts of the valve.
2.
Install two plungers (2) and two springs (1) in
body (3).
3.
Install the O-ring seals on plugs (4). Install plugs
(4) in the body.
4-86
