TM 5-3805-260-24
BOWL AND EJECTOR CONTROL VALVE
4.
Install washers (shims) (9), spring (6), washer
(10) and piston (7) in valve body (5). Put the O-
ring seal on housing (11) and install the housing
in valve body (5). Install the ball and sleeve (8)
in the housing. Install snap ring (12) in the
housing with tool (A). See TESTING AND
ADJUSTING for correct adjustment.
5.
Install the seal and the washer in the inside of
the body. Put O-ring seal (13) on relief valve
assembly (14) and install it in the body.
6.
Install O-ring seal (18) and retainer (17) in the
body. Put O-ring seal (15) in retainer (16) and
install the retainer in the body.
7.
Put retainer (22), spring (20) and retainer on
valve spool (19). Install snap ring (21) on the
valve spool with tool (B).
4-87
