TM 5-3805-260-24
CARRY CHECK VALVE FOR BOWL LIFT CYLINDERS
REMOVE CARRY CHECK VALVE FOR
BOWL LIFT CYLINDERS
WARNING: Lower the scraper bowl all of the way
and release all of the pressure on the hydraulic
system before any lines are disconnected.
1.
Disconnect hose assemblies (1) and (2) from
valve body (3).
2.
Remove four bolts (4) and remove valve body
(3) from the bowl lift cylinder.
3.
Remove O-ring seal (6) from salve body (3).
4.
Remove fitting (5), the spring and the valve
from valve body (3). Remove the O-ring seal
from fitting (5).
INSTALL CARRY CHECK VALVE FOR
BOWL LIFT CYLINDERS
1.
Install valve (3) and spring (2) in valve body (1).
2.
Install the O-ring seal on the fitting that holds
valve (3) and spring (2) in position.
3.
Install O-ring seal (4) and valve body (1).
4.
Put valve body (1) in position on the bowel lift
cylinder and install the four bolts that hold it.
5.
Connect the pilot hose assembly and hose
assembly (5) to body (1).
4-90
D
!
