TM 5-3805-260-24
BOWL LIFT CYLINDERS
REMOVE BOWL LIFT
CYLINDERS
1. Lower the bowl before the hydraulic lines are
disconnected.
2. Disconnect hose assembly (I) from cylinder assembly
(2).
3. Remove the four bolts that hold carry check valve (3)
to cylinder assembly (2).
4. Fasten a hoist to cylinder assembly (2).
5. Remove the two bolts (4), plate (6) and pin (5) that
hold the rod end of cylinder assembly (2) to the
scraper.
6. Remove the two bolts, plate and pin (7) that hold
cylinder assembly (2) and remove the cylinder
assembly from the machine. The weight of the
cylinder assembly is 105 lb. (47. 3 kg).
INSTALL BOWL LIFT
CYLINDERS
1. Fasten a hoist to cylinder assembly (2) and put the
rod end in position in the scraper.
2. Install pin (1) to hold the rod end of the cylinder
assembly.
4-91
