TM 5-3805-260-24
ELEVATOR SPEED REDUCER
ASSEMBLE ELEVATOR SPEED
REDUCER
Tools Needed
A
B
C
5M2160
Duo-Cone Seal Installer
1
1P520
Driver Group
1
1P163
External Snap Ring Pliers
1
1.
Install bearing cup (1) in plate (2).
NOTE: Make sure the Duo-cone seals are clean and dry. Make sure all
metal surfaces that the seal makes contact with are clean and dry. Put
clean oil on the contact surfaces of the metal seals.
2.
Install rubber toric sealing ring to the metal float-
ing ring. Turn the-plate as shown. Install the
Duo-Cone seal in the plate with tool (A).
3.
Install rubber toric sealing ring on the metal
floating ring. Install the Duo-Cone seal in shaft
(3) with tool (A).
4.
Install plate (2) on the shaft.
5.
Install bearings (4) and (5) on the shaft as shown.
4-125
