TM 5-3805-260-24
INPUT TRANSFER GEARS
7.
Use tooling (A) and remove the inner and outer bearing cups
from cage (4).
8.
Remove the ring that holds the bearing cups apart from cage
(4).
9.
Remove the O-ring seal from cage (4).
10.
Remove bolts (I I).Install two 3/8"-16 NC forcing screws and
remove manifold (10).
11.
Remove the small O-ring seal from cage assembly (14).
12.
Use tool (B) and remove nut (12) and lock (13).
CAUTION: When the cage assembly and bearing cone are removed,
gear (15) is free to fall from case assembly. Use a wooden block to
hold gear in position to prevent damage.
13.
Install two 3/8"-16 NC forcing screws and remove cage
assembly (14) and the bearing cone as a unit from case
assembly (17).
14.
Remove the O-ring seals from case assembly (17).
15.
Remove O-ring seal (16) from cage assembly (14).
16.
Remove gear (15) from case assembly (17).
17.
Remove the spacer from gear (15).
3-191