TM 5-2350-377-13&P
0023
REMOVAL
NOTE
Refer to TB 43-0001-39 Series for all wiring harnesses not shown for Repair task.
Tag all electrical leads prior to removal for installation.
1.
Remove nut (Figure 1, Item 6), lockwasher (Figure 1, Item 5), flat washer (Figure 1, Item 7), and hose clamp
(Figure 1, Item 8) from headlight wiring harness (Figure 1, Item 2) and apron stud (Figure 1, Item 9). Discard
lockwasher.
2.
Disconnect headlight wiring harness (Figure 1, Item 2) from apron wiring harness (Figure 1, Item 3) at terminals.
3.
Disconnect two headlight wiring harness (Figure 1, Item 2) terminals from two apron mercury switch terminals
(Figure 1, Item 1).
4.
Remove headlight wiring harness from four braces (Figure 1, Item 10) inside apron (Figure 1, Item 4) back
wall.
5.
Remove headlight wiring harness (Figure 1, Item 2) from apron (Figure 1, Item 4).
4
3
2
1
6
5
7
10
8
9
M0089HBF
Figure 1. Headlight Wiring Harness Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00018)