TM 5-2350-377-13&P
0023
INSTALLATION
1.
Route headlight wiring harness (Figure 2, Item 2) through openings in top of four braces (Figure 2, Item 10)
inside apron (Figure 2, Item 4) back wall, starting from left headlight to right headlight.
2.
Install nut (Figure 2, Item 6), new lockwasher (Figure 2, Item 5), flat washer (Figure 2, Item 7), and hose clamp
(Figure 2, Item 8) to headlight wiring harness and apron stud (Figure 2, Item 9).
3.
Connect two apron wiring harness (Figure 2, Item 2) terminals to two apron mercury switch terminals
(Figure 2, Item 1).
4.
Connect headlight wiring harness (Figure 2, Item 2) to apron wiring harness (Figure 2, Item 3) at terminals.
4
3
2
1
6
5
7
10
8
9
M0090HBF
Figure 2.
Headlight Wiring Harness Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
Install LH and RH headlight assembly (WP 0030).
END OF TASK
END OF WORK PACKAGE
0023-3/4 blank
03/15/2011Rel(1.8)root(maintwp)wpno(M00018)