TM 5-3800-205-23-1
CYLINDER HEAD REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Equipment Condition
Maintenance Level
Batteries disconnected (WP 0067 00)
Direct Support
Coolant drained (WP 0010 00)
Tools and Special Tools
Rocker arm cover removed (WP 0011 00)
Tool kit, general mechanic's (Item 33, WP 0172 00)
Crankcase breather removed (WP 0012 00)
Shop equipment, field automotive (Item 23, WP
Fuel transfer pump and governor assembly
removed (WP 0141 00)
Fuel injector control linkage removed (WP 0138
Materials/Parts
Oil, lubricating (Item 25, 26 or 29, WP 0171 00)
Fuel unit injectors removed (WP 0139 00)
Rag, wiping (Item 31, WP 0171 00)
Rocker shaft and pushrods removed (WP 0133 00)
Air cleaner disconnected (WP 0018 00)
Gasket
Turbocharger removed (WP 0143 00)
References
Aftercooler and air inlet heater removed (WP 0142
Exhaust manifold and muffler removed (WP
Personnel Required
Inlet manifold removed (WP 0137 00)
Two
CAUTION
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection, main-
tenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suit-
able containers before opening any compartment or disassembling any component containing
fluids.
Dispose of all fluids according to local regulations and mandates.
