TM 5-3800-205-23-1
CYLINDER HEAD REPLACEMENT - CONTINUED
0125 00
INSTALLATION - CONTINUED
7.
Tighten cylinder head bolts according to following procedure:
a.
Tighten bolt (1) through bolt (14) in numerical
sequence to 110 lb-ft (150 Nm).
b.
Tighten bolt (1) through bolt (14) again in
numerical sequence to 320 lb-ft (435 Nm).
c.
Tighten bolt (1) through bolt (14) again in a
numerical sequence to 320 lb-ft (435 Nm).
d.
Tighten bolt (15) through bolt (20) in numerical
sequence to 41 lb-ft (55 Nm).
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
WARNING
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Failure to
follow this warning may cause injury or death due to carbon monoxide poisoning.
21.
Start engine (TM 5-3800-205-10-1 or TM 5-3800-205-10-2). Check for leaks and proper operation.
END OF WORK PACKAGE
0125 00-4