TM 5-3800-205-23-1
CRANKSHAFT FRONT SEAL REPLACEMENT - CONTINUED
0127 00
INSTALLATION
NOTE
Ensure that crankshaft flange and front housing are thoroughly clean before installing crankshaft front seal.
1
1
2
3
NOTE
Crankshaft seal is designed to be installed dry.
1.
Loosely position new front seal (1) in engine (2).
2.
Position installation sleeve (3) on front seal (1) and install front seal.
3.
Remove installation sleeve (3) from front seal (1).
4.
Ensure that seal surface of crankshaft pulley is in good condition and is thoroughly clean and dry.
5.
Install vibration damper and pulley (WP 0126 00).
END OF WORK PACKAGE
0127 00-2
