TM 5-3800-205-23-1
VIBRATION DAMPER AND PULLEY REPLACEMENT - CONTINUED
0126 00
REMOVAL - CONTINUED
2.
Remove four screws (4) and retaining plate (5) from pulley (6).
WARNING
Ensure puller is mounted correctly. Keep body to one side of pulley when removing pulley. Failure to follow
this warning may result in injury to personnel.
3.
Using puller, remove pulley (6) from engine.
INSTALLATION
1.
Install pulley (6) on engine. Install retaining plate (5) and four screws (4).
5 (HIDDEN)
4
6
6
390-1186
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
NOTE
Vibration damper weighs 40 lb (18 kg).
2.
Install vibration damper (3) to pulley with eight new
lockwashers (2) and screws (1).
1,2
3
3.
Install drive belts (WP 0032 00).
4.
Install radiator (WP 0144 00).
390-033
END OF WORK PACKAGE
0126 00-2
