TM 5-3805-248-23-2
GOVERNOR ASSEMBLY REPAIR - CONTINUED
0354 00
ASSEMBLY - CONTINUED
17.
Install lockring (56) to secure weight assembly (55) to
50
51
cylinder assembly (38).
53
52
18.
Install lockring (54) on weight assembly (55).
54
19.
Install washer (53), thrust bearing (52) and washer
55
(51) on sleeve (50).
20.
Install sleeve (50) in weight assembly (55) and on pis-
56
ton and valve assembly (57).
21.
Install sleeve (58) through sleeve (50) and into piston
38
and valve assembly (57).
394-1220
22.
Install washer (48), spring (47) and washer (46) on
43
cylinder assembly (38).
44
23.
Install governor riser (44) on load stop bolt (45).
45
24.
Install load stop bolt (45) on cylinder assembly (38).
46
47
25.
Install spring seat (43) on governor riser (44) on load
48
stop bolt (45).
38
26.
Install dowel (49) on cylinder assembly (38).
49
394-1219
27.
Position cylinder assembly (38) on rear of fuel injection pump (3).
28.
Install lock ring (36) and three bolts (37).
34
36
35
42
WARNING
41 40
38
Some components are under spring tension.
39
Wear eye protection and use caution when dis-
assembling them, to avoid injury.
37
29.
Install spring (35), washers (40, 39 and 34) and gover-
nor spring seat (41) on load stop bolt (45).
30.
Install wave spring (42) on load stop bolt (45).
3
394-1218
0354 00-8
