TM 5-3805-248-23-2
GOVERNOR ASSEMBLY REPAIR - CONTINUED
0354 00
FUEL SETTING PROCEDURE - CONTINUED
3.
Remove shutoff solenoid, if equipped, or cover and install adapter (94).
4.
Move governor control lever to LOW IDLE position (rotate governor shaft counterclockwise).
GOVERNOR CONTROLLER
94
93
95
394-1707
394-1708
5.
Install timing pin (88) in top of fuel injection pump housing.
89
90
88
394-1706
8
91
92
NOTE
Push timing pin in until it contacts fuel rack.
6.
Use hook (95) through adapter (94) to push sleeve and rack to shutoff position. Ensure timing pin (88) engages in slot
(93).
0354 00-12
