TM 5-3805-248-23-2
GOVERNOR ASSEMBLY REPAIR - CONTINUED
0354 00
FUEL SETTING PROCEDURE - CONTINUED
7.
Move governor control lever to FULL LOAD position (rotate governor shaft clockwise) and fasten in position.
95
88
96
SLEEVE AND RACK
394-1710
394-1709
8.
Use hook (95) to pull sleeve and rack through servo valve (96), against timing pin (88).
89
90
88
394-1706
8
91
92
NOTE
Ensure all needles of indicator are on zero.
9.
Adjust dial indicator (91) in collet (92) to zero and tighten collet.
10.
Remove timing pin (88), hook (95) and release governor control lever.
0354 00-13
