TM 5-3805-260-24
16. Remove armature assembly (21) from the starting
motor housing
17. Remove eight screws (24), pole shoes (23) and
field winding (coil) assembly (22) from the starting
motor housing. It may be necessary to use an
impact driver to remove screws (24).
NOTICE
Do not use a liquid cleaning agent to clean the
armature assembly, field winding (coil) assembly or
pinion drive assembly. A liquid cleaning agent can
damage the insulation in the armature and field
(coil) winding assemblies and would dissolve the
grease in the pinion drive assembly.
18. Clean the armature assembly, field winding (coil)
assembly and pinion drive assembly with mineral
spirits and a brush
19. If the commutator is dirty, it may be cleaned with No
00 sandpaper. Do not use emery cloth.
20.
Inspect
all
parts
for
wear
and
damage,
3-48