TM 5-3805-260-24
ENGINE REAR SUPPORTS
2. Install the left rear engine support as follows:
a) Put the lower half of the mount assembly in
position on the tractor frame.
b) Put support assembly (6) in position and in-
stall bolts (5) and the washers to hold it to the
flywheel housing.
c) Put the upper half of the mount assembly and
brace assembly (7) in position. Install bolt (8)
and the nut.
d) Lower the engine with tooling (A) and
tighten bolt (8).
3. Put panel assembly (9) in position and install the
four bolts, washers and two nuts to hold it.
4. Remove tooling (A) from under the machine.
end by:
a) install crankcase guard
3-128
