TM 5-3805-260-24
TRANSMISSION
15. Install springs (30).
16. If necessary, make a replacement of dowels (31) on
each side of No. 5 clutch housing (32) so they extend
the same height as the original dowels.
17. Use tool (A) to hold the piston in No. 5 clutch housing
(32) and install the clutch housing. Remove tooling (A).
18. Install No. 4 clutch ring gear (34) and ring (33) to hold
the gear in position.
19. Install the three disc assemblies (35) and two plates
(36)for the No. 4 clutch. Start with a disc assembly.
20. Install springs (37).
3-206
