TM 5-3805-260-24TRANSMISSION26. Turn housing (55) and planetary carrier (47) over and installring (59) to hold the planetary carrier in position.27. Install the No. 4 planetary carrier (45) in clutch housing (55).28. Turn clutch housing (55) and the No. 4 planetary carrierover and install the plate and bolt (61) to hold the carrier inposition. Make sure the boss in the plate is engaged withthe hole in the No. 4 planetary carrier. Tighten bolt (61 ) toa torque of 34 2 Ib.ft. (45 3 N m).29. Install ring (60) in No. 3 carrier (47).30. Install tooling (A) to hold the No. 4 piston in position in clutchhousing (55).31. Install two ’2"-13 NC forged eyebolts in clutch housing (55)and fasten a hoist to it.32. Put clutch housing (55) in position on the transmission.Make sure the springs are correctly engaged in the No. 4piston.33. Remove the eyebolts and tooling (A).34. Make sure No. 3 piston (63) is in position in clutch housing(55) and install ring gear (62).3-208
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
