TRANSMISSION
c)
Install plate (97) in coupling (96).
d)
Install hub (94) in coupling (96).
e)
Install the trio disc assemblies (98) and
plate (99) in coupling (96) as shown.
f)
Put clean oil on seal rings (101) and install
them on manifold (100).
g)
Make sure the seal rings (101) are in the
centers of their respective grooves. Lightly
push manifold (100) into coupling (96).
h)
Install the washers, bolts (103) and springs
(102).
i)
Make sure the O-ring seal is in position in
coupling (96) and install piston (104) on the
coupling. Install the bolts and locks that
hold the piston and coupling together.
55.
Install two 3/8"-16 NC forged eyebolts in the No.
1 clutch and fasten a hoist to it.
56.
Install the No. I clutch in the transmission as
shown.
3-212
