TM 5-3805-260-24
TRANSMISSION
65.
Install plate (1 16).
66.
Install pressure control valve (117) and install
four of the bolts that hold the valves in position.
Remove the guide bolts and install the remainder
of the bolts that hold the valve together. Tighten
the twelve point 5/16"- -18 NC bolts to a torque
of 22 3 lb. ft. (28 4 N. m) and the 3/8"-16 NC
bolts to a torque of 35 3 lb. ft. (45 4 N. m).
67.
Install the gasket and cover (119) on the
transmission case.
68.
Install the O-ring seals on sleeves (118) and
install the sleeves in the transmission.
end by:
a)
connection of input transfer gears to
transmission
3-214
