TM 5-3805-260-24
ELEVATOR LOWER SHAFT
8.
Remove seal (7) from hub (6).
9.
Remove key (9) and washers (shims) (8) from shaft
(10).
NOTE: Keep the washers (shims) together for reference during
installation.
10.
Fasten a hoist to the shaft housing. Lift the housing so
the roller is free to turn. Use two men to slide roller (
11) off of the shaft. The weight of the roller is 70 lb.
(32 kg).
11.
Remove bearing (12) from roller (II11).
12.
Turn the roller over. Remove bearing (13) from roller (I
1).
13.
Do Steps 6 through 12 on other side of the shaft.
4-151
TM 5-3805-260-24
ELEVATOR LOWER SHAFT
